Sensorcon CO Inspector

Sensorcon CO Inspector


 

Sensorcon CO InspectorSummary of Product

The Sensorcon CO Inspector is small and very portable.  It is a versatile and rugged low-level carbon monoxide detector that is waterproof and dust-proof. For you geeks, it is also “intrinsically safe”, which means it can be used in explosive environments.  It compares favorably with devices that cost twice as much or more, and operates in a wider environmental range than our other products. It responds very quickly and accurately to CO and alarms you with flashing red LEDs, an 80 dB horn, and it vibrates like a cell phone. A metal loop at the top and a strong steel clasp on the rear offer additional methods of mounting it.  Available accessories extend its capabilities even further. The downside is the need for calibration (to maintain that high accuracy) and a short lifetime. However, if you want one product that does it all, this is as close as you can get, and we highly recommend it.

 

 



Features At A GlanceSensorcon CO Inspector side view

Is It UL/CSA: No
Low-Level Info: Displays ambient level continuously from 1 ppm.
Operating Environment: -4 to 122 deg F; 20-90 %RH (0 – 99% intermittent)
Display & Range: Yes, 1 – 1999 ppm +/- 10%
Alarm Levels: 35 ppm: immediately alarms (mutable for 5 mins)T Sensorcon back
200 ppm: immediately alarms (mutable for 5 mins) Alarms are beeping 80 dB horn, blinking red LEDs and vibration.
Power Source: Replaceable lithium “coin” battery
Warranty: 1 year
Expected Life: 2 years
Other Considerations: Calibration recommended. Frequency depends on accuracy need. Can be done by yourself or returned to factory. A wand can be attached to turn this into a combustion analyzer/sniffer.